:::: Sweet Heat Systems® ::::


  • Designed to prevent freezing of the wellhead, when used in conjunction with Insulation Snakes®.

  • * Sweet Heat System® circulates hot ethylene glycol through 3/4" braided steam hose using a free* heat source.

  • Kits are available for both air and water cooled engines, and electric pumpjack drivers.

    • Eliminates high propane consumption by allowing for use of free casing gas year round.
    • Eliminates freeze-ups of wellhead, casing gas and surface equipment (e.g. production lines and tanks).
    • Eliminates downtime and steaming costs due to freeze-ups.
    • Reduces liquid build-up in the fuel gas scrubber.
    • Reduces wax buildups in the wellhead surface flowline, enhancing gas and oil production.

  • Eliminates the need to bury a surface flowline (a typical * Sweet Heat System® installation would cost less than burying the surface flow line, plus you have all the other added benefits) when used in conjunction with the Insulation Snakes®.

  • High temp shutdown is included to protect your engine and your * Sweet Heat System® (comes standard with each kit).*

  • * Sweet Heat Systems® are available for any type of wellhead as long as there is a pulley turning or a power source nearby.

  • A * Sweet Heat System® may be used to enhance the engine's cooling capability by removing the insulation on the 3/4" steam hose on hot summer days.*

  • Each * Sweet Heat System® comes complete with all fittings and instructions required to install, and with 120ft. of 3/4" steam hose. Routed from engine to wellhead to engine (based on an average wellhead installation).

            *Notes from points above:
             * Water cooled engines only. (free heat feature)
             * Patented

SWEETHEAT HARDWARE PRODUCTS:

  • Kits are available for water and air cooled engines or electric pumpjack drivers.
  • Kits provide all parts to heat the wellhead.
  • Extension kits (parts to extend the system beyond the wellhead to production lines, production tank, load line, separator buildings, etc.) are available and include a manifold to separate the systems for well service and maintenance.
  • Worn pumps for these kits will be accepted when returned to Insulation Snakes. A $35.00 credit will be issued towards the purchase of a new pump.

    Custom kits will be assembled for the following engines upon request:
  • ARROW Y-18
  • CHEV 350
  • CONTINENTAL
  • ELECTRIC DRIVERS
  • FORD 300
  • FORD 460
  • GEMINI
  • KUBOTA
  • LISTER
  • WITTIE

    If your engine is not mentioned, ask us! A “Sweet Heat System®” can be designed to fit almost every application.

Toll Free: 1-888-696-2567    Fax: 1-780-696-2567          

Made In Canada Made and Manufactured in Canada by Insulation Snakes®
Made In USA Made and Manufactured in USA by Insulation Snakes®